Every engine is supplied with air filters for supplying clean air free from dirt, moisture for complete fuel combustion. We manufacture mild steel housings for these filters as per customer specifications. 16" and 18" sized housings manufactured. Sheet thickness varies from 1.00 mm to 1.6 mm.
As the name implies, it is used for clamping air filter housing assembly. The inside diameter ranges from 5½” to 18”.
As the name implies, it is used for clamping air filter housing assembly. The inside diameter ranges from 5½” to 18”.
Breather Crankcase for an engine prevents buildup of pressure and also acts as an oil trap.
These are fabricated water cooled exhaust manifold (wet manifolds) used at the exhaust end of the engine. We manufacture exhaust manifolds for 4 port as well as 6 port engines. The manifold is constructed with the outer jacket for water flow and inner jacket for exhaust gas. For some manifolds which are fabricated, we have developed MS castings of mounting flanges which are mounted to the engine.
This is one of many connections used at the outlet side for exhaust gas in an engine. We manufacture elbows in welded construction and in sizes of 4”, 5”, 5½”, 6” and 7” outside diameter. Elbow wall thickness is 1.6 mm.
This is one of many connections used at the outlet side for exhaust gas in an engine. We manufacture elbows in welded construction and in sizes of 4”, 5”, 5½”, 6” and 7” outside diameter. Elbow wall thickness is 1.6 mm.
These are fabricated water cooled exhaust manifold (wet manifolds) used at the exhaust end of the engine. We manufacture exhaust manifolds for 4 port as well as 6 port engines. The manifold is constructed with the outer jacket for water flow and inner jacket for exhaust gas. For some manifolds which are fabricated, we have developed MS castings of mounting flanges which are mounted to the engine.
These are various parts manufactured by us which are used on either inlet/ outlet side of an engine.